Publish Time: 2026-11-12 Origin: Site
l Fortune Business Insights projects the global flexitank market to reach USD 3.20 billion by 2034, with Asia-Pacific accounting for 39.25% of the market in 2025.
l The UNECE CTU Code, COA TG-07, and PAS 1008:2016 serve different purposes in flexitank safety, quality assurance, and performance verification.
l Buyers should verify compliance documents against the specific flexitank design, manufacturing site, cargo, and intended transport route.
l LAF Technology offers flexitank capacity ranges, valve options, and a range of railway-related, management-system, and application-specific compliance references.
l A structured supplier evaluation should cover quality control, cargo compatibility, loading limits, container condition, transport requirements, and technical support.
Flexitanks are single-use liquid transport systems installed inside standard freight containers. They are designed to transport compatible, non-dangerous bulk liquids, including edible oils, fruit juice concentrates, wine, and selected industrial liquids.
According to Fortune Business Insights, the global flexitank market is projected to grow from USD 1.076 billion in 2026 to USD 3.204 billion by 2034, at a compound annual growth rate (CAGR) of 14.62%. Asia-Pacific accounted for 39.25% of the market in 2025.
These figures represent one research provider's market estimates and forecast. Market valuations can vary depending on methodology, product scope, and assumptions.
For buyers, the more practical consideration is how to evaluate suppliers as shipment requirements become more complex. Procurement decisions should consider cargo compatibility, documented quality controls, applicable compliance evidence, multimodal transport suitability, operational support, and total logistics cost—not just nominal capacity or unit price.
A flexitank is a transport system, not simply a flexible bag. Its performance depends on the interaction of the flexitank design, fittings, restraint arrangements, container condition, cargo properties, and handling procedures.
Manufacturers and operators play different roles.
l Manufacturers produce flexitanks to defined designs and quality specifications. They should be able to explain their manufacturing controls, material traceability, inspection procedures, and applicable test evidence.
l Operators may procure and manage flexitank systems, assess cargo risks, coordinate transport logistics, arrange installation and removal, and manage used-flexitank handling. Some operators also commission products from original equipment manufacturers (OEMs).
A supplier may perform more than one role. Buyers should establish which entity manufactures the actual product, which company manages the shipment, and which party is responsible for technical support and incident response.
Before selecting a supplier, ask for the legal name of the manufacturer, the relevant production site, the product design reference, and documentation supporting the supplier's stated role.
Three important references frequently appear in flexitank procurement: the UNECE CTU Code, the COA Code of Practice (TG-07), and PAS 1008:2016. They serve different purposes and should not be treated as interchangeable certifications.
The CTU Code is a non-mandatory global code of practice jointly developed by the International Maritime Organization (IMO), the International Labour Organization (ILO), and the United Nations Economic Commission for Europe (UNECE). It addresses the handling and packing of cargo transport units for transport by sea and land.
Its guidance is relevant to flexitank operations, including cargo compatibility, container preparation, loading arrangements, and transport safety. The code is not, by itself, a flexitank product certification.
The CTU Code states that dangerous goods must not be transported in flexitanks. Shippers should verify the cargo classification against applicable regulations before selecting a packaging and transport system.
The Container Owners Association (COA) maintains the Code of Practice for Flexitank Container Systems (TG-07). It sets out practices and responsibilities for flexitank supply-chain participants and covers the COA Quality Conformance (CQC) scheme.
The COA Flexitank Quality List (FQL) records companies that have attained CQC status. Under the COA framework, CQC status is recorded in the FQL rather than issued as a separate certificate.
Buyers should consult the current COA flexitank resources and verify:
l Whether the supplier is listed in the appropriate manufacturer or operator category.
l Whether the relevant company currently holds the stated quality-conformance status.
l Whether the flexitank design reference and manufacturing site match the proposed product.
l Whether the relevant audit records, material tests, and rail-impact test evidence are available and applicable.
A company-level claim alone is not sufficient. The evidence must relate to the product and supply arrangement being evaluated.
PAS 1008:2016 specifies requirements and testing provisions for single-use flexitanks intended for non-dangerous liquids in general-purpose freight containers. Its provisions include material properties, valve leak-tightness, and resistance to rail impact.
The standard includes a rail-impact test requirement based on 2g retardation or acceleration. Buyers should request the relevant test report and confirm the tested design, test scope, manufacturing site, and applicability to the intended shipment.
A rail-impact test result does not automatically establish acceptance by every railway, carrier, or route. Additional carrier-specific requirements or approvals may apply.
When a supplier claims compliance, request the underlying documentation and check:
1. Issuer and validity: Who issued the document, and is it current?
2. Scope: Does it apply to the specific product, design, and production site?
3. Test conditions: What configuration and conditions were evaluated?
4. Transport applicability: Does the evidence match the intended transport mode and route?
5. Cargo suitability: Is the product compatible with the actual liquid and operating temperature?
A standard, a management-system certificate, a product test report, and a regulatory compliance statement are different types of evidence. Each should be evaluated according to its purpose.
A consistent evaluation framework helps procurement teams compare suppliers using documented evidence rather than price alone.
Ask how raw materials, films, valves, assembly processes, and finished-product inspections are controlled.
A qualified supplier should be able to explain its quality procedures and provide appropriate batch or production traceability. Confirm which quality-management certifications apply to the actual manufacturing entity and site.
The flexitank configuration must match the cargo's composition, density, viscosity, loading temperature, transport temperature, and purity requirements.
Chemical compatibility alone does not establish overall transport suitability. Some liquids may require specific material structures, barrier properties, or operating procedures.
Provide the supplier with accurate cargo information and request written confirmation that the proposed configuration is suitable.
Nominal volume is not the same as the permissible loading quantity.
The actual loading plan must account for cargo density, container payload limits, applicable regulations, carrier requirements, and the flexitank manufacturer's instructions.
Do not select a configuration solely because it has the largest advertised capacity. Confirm both the permissible liquid volume and total cargo mass before loading.
Container condition is part of the flexitank safety system.
The container should be structurally sound, clean, dry, and free of sharp edges, protrusions, or floor defects that could damage the flexitank. Inspection, preparation, protective lining where required, restraint arrangements, and installation quality all matter.
Agree in advance who is responsible for container inspection and installation, and ensure that the work follows the applicable instructions.
Confirm whether the shipment involves ocean, road, or rail transport, and identify any carrier or route-specific requirements.
Rail-related test reports and approvals should be checked against the exact product configuration and intended route. Do not assume that one certificate or test result guarantees acceptance by every carrier.
Where necessary, obtain confirmation from the relevant transport provider before dispatch.
Evaluate the supplier's ability to support installation, loading, discharge, troubleshooting, and incident escalation.
Also clarify responsibilities for used-flexitank handling, waste management, and recycling where applicable. These operational arrangements can affect shipment risk and total logistics cost.
LAF Technology: Specifications and Compliance References
LAF Technology offers flexitank solutions for compatible non-hazardous liquids, including food-grade liquids, industrial oils, non-hazardous chemicals, wine, juice, and bitumen.
The following specifications and references are available on the official LAF flexitank product page.
Specification | LAF information |
Capacity in a 20ft container | 14,000–26,000 litres |
Capacity in a 40ft container | Up to 28,000 litres |
Valve options | Butterfly valve and ball valve |
Stated application areas | Food-grade liquids, industrial oils, non-hazardous chemicals, wine, juice, and bitumen |
Railway-related references | CRCC (China), AAR (USA) |
Other references | ISO 9001, ISO 14001, ISO 14067, FSSC 22000, FDA, EU 10/2011, KOSHER, and HALAL |
Important: These references do not all represent the same type of certification or approval. Railway-related approvals and test references, management-system certifications, food-contact compliance references, and market-specific or religious certifications have different scopes and purposes.
Buyers should request the relevant documents and verify the issuing organization, validity, certified or tested entity, production site, product configuration, and intended application. The appearance of a reference on a company website should not replace document-level verification.
The capacity figures above are product ranges, not universal loading limits. The permissible loading volume and mass must be confirmed against cargo density, container payload, applicable carrier requirements, and the manufacturer's instructions.
LAF product information also covers applications across different temperature ranges. Because temperature limits can depend on the particular model, cargo, and loading conditions, buyers should obtain written confirmation of the applicable loading and operating temperatures for their chosen configuration.
Capacity depends on the design and shipment requirements. LAF offers a capacity range of 14,000–26,000 litres for 20ft configurations and up to 28,000 litres for 40ft configurations.
These figures are product specifications, not universal loading limits. Confirm the permissible volume and cargo mass with the manufacturer and transport provider before loading.
Yes. Flexitanks can be used for compatible food-grade liquids. LAF’s food-grade flexitanks are used for applications including vegetable oils, olive oil, palm oil, fruit juice concentrates, wine, beer, syrups, glucose, milk, sauces, malt extracts, and other compatible liquid foods. Suitability depends on the specific flexitank configuration, food-contact documentation, and destination-market requirements. Buyers should confirm the exact product configuration and request the relevant food-contact documentation for the intended application.
The UNECE CTU Code states that dangerous goods must not be transported in flexitanks. Flexitanks are generally intended for compatible non-dangerous liquids.
Cargo classification must be confirmed against applicable regulations before selecting the packaging system. If the cargo is regulated as dangerous goods, use a transport and packaging solution approved for that cargo.
No. The container must be suitable for flexitank use and in sound structural condition. It should be clean, dry, and free of sharp edges, protrusions, and floor defects that could damage the system.
Follow the manufacturer's inspection, preparation, lining, restraint, and installation instructions before loading.
A properly selected and installed flexitank should not cause container bulging when used under the specified operating conditions. However, the risk of container deformation depends on several factors, including container condition, flexitank design, cargo properties, filling volume, restraint arrangements, and loading procedures.
To help minimize this risk, it is recommended that the container be inspected before installation, that the specified filling limits be followed, that installation and restraint be properly performed, and that loading comply with the manufacturer's loading instructions.
Start by identifying the issuing organization and reviewing the complete document rather than relying on a logo or summary claim.
Check validity, scope, the named company and manufacturing site, the relevant product design, and any applicable test conditions. For COA-related claims, check the current FQL and confirm the supplier category and quality-conformance status. For rail shipments, verify that the available test or approval evidence matches the intended configuration and route.
Some manufacturers offer OEM or ODM configurations, but the availability and scope of customization vary by supplier.
Before placing an order, confirm who owns and controls the product design, how materials and components are traced, what testing supports the customized configuration, and whether the resulting product meets the intended cargo and transport requirements.
Use this checklist when comparing suppliers or preparing a procurement review.
l The supplier's role is clear: manufacturer, operator, distributor, or service provider.
l The actual manufacturer, production site, and relevant product design have been identified.
l Applicable quality status and supporting documents have been verified.
l Cargo compatibility and food-contact requirements, where relevant, are documented.
l The proposed capacity is appropriate for cargo density, container payload, and carrier requirements.
l Loading temperature, transport temperature, and unloading procedures are confirmed for the selected model.
l Container inspection, preparation, installation, and restraint requirements are defined.
l Certificates, test reports, and approvals have been checked for the intended product, transport mode, and route.
l Technical support, incident escalation, and used-product handling responsibilities are agreed in advance.
l The supplier's quotation covers the relevant product configuration, documentation, and agreed services.
Selecting a flexitank manufacturer requires a balanced assessment of product suitability, quality evidence, transport requirements, operational support, and total logistics cost.
Market growth may expand the range of suppliers available to buyers, but the fundamentals remain the same: verify the product and manufacturer, confirm cargo and route requirements, inspect the container, and follow documented procedures.
The best flexitank solution is not necessarily the one with the largest advertised capacity or the lowest unit price. It is the one whose design, supporting evidence, and operating procedures match the shipment's actual requirements.
l LAF Flexitanks — Explore product specifications and application areas.
l LAF Food-Grade Flexitank — Learn about flexitank options for compatible food liquids.
l How Are Flexitanks Loaded and Unloaded Safely? — Review practical loading, unloading, and operational safety considerations.
l LAF Flexitank FAQ — Find additional product and handling information.
Choosing a suitable flexitank starts with understanding the cargo and shipment conditions.
Contact LAF Technology to discuss your cargo, container availability, and transport route, and to evaluate an appropriate configuration. To help the team assess your request, provide the following information where available:
l Cargo name and composition
l Cargo density and viscosity
l Loading and expected transport temperatures
l Container type and availability
l Loading and discharge arrangements
l Origin, destination, and intended transport route
l Required compliance documents or carrier approvals
Email: sales@laftechnology.com
Website: https://www.laftechnology.com/
1. Fortune Business Insights — Flexitank Market Size, Share & Industry Analysis
2. UNECE — Code of Practice for Packing of Cargo Transport Units (CTU Code)
3. COA — TG-07 Code of Practice for Flexitank Container Systems
4. COA — Flexitank Quality List (FQL)
5. LAF Technology — Official Flexitank Product Information
PAPER IBC IBC LINER IBC Electric Heating Pad FUSIBLE ASPHALT BAG
© 2021 Qingdao LAF Technology Co., Ltd. 鲁ICP备19051157号-11